R&S M3SR 4100 Series - Selecting the Tx Message

Operating Manual 6175.4760.02 – 01 4.19
M3SR Series 4100 Selecting the Tx Message
4.3.5.4 Selecting the Tx Message
Softkey Type Description
Listbox 1. Press 'TX AMD' softkey.
2. Select desired message name from listbox
with the knob.
3. Press 'ENT' to confirm.
The now selected AMD message will be sent
with the next link setup.
--- = no Tx message is sent with the next
ALE call.