Operating Manual 6175.4760.02 – 01 4.189
M3SR Series 4100 Selecting the Interleaving Length
4.8.4.7 Selecting the Interleaving Length
By means of softkey 'INTLV' (interleaver) the operator can change the interleaver length.
Softkey Type Description
Listbox 1. Press softkey 'INTLV'.
2. Select desired interleaver length from list-
box.
3. Press 'ENT' to confirm.
The new selection is now effective.
Possible values:
NO, SHT (short), MDL, (middle) LNG (long)
Through the interleaver function, the data with-
in the data block are rearranged. The extent of
rearrangement is defined by the time factor
short, middle or long. Rearrangement im-
proves the error correction capability.
To Next Page
Loading...