R&S M3SR 4100 Series - Changing the Date and Time

M3SR Series 4100 Changing the Date and Time
4.50 Operating Manual 6175.4760.02 – 01
4.3.6.14 Changing the Date and Time
Softkey Selection / Editor Description
Example for entering date 2006.04.15 and
time 12:30:00
Press softkey 'Date Time'.
1. Press softkey 'Date Time'.
2. Enter a new date and/or time.
3. Press 'ENT' to confirm.
The new setting is now effective.
Enter valid date either with numeric keypad or/
and with knob:
When time and date are correct, press 'ENT' to
confirm.
The currently set date and time is also dis-
played in the central area.
You can skip a value for entering by pressing: