M3SR Series 4100 User Level
3.122 Operating Manual 6175.4760.02 – 01
3.6 User Level
In the Control Unit Maintenance menu the level of user access (user levels 0 to 2 are avail-
able) can be selected, allowing the user to perform the functions he is authorized to use. Se-
lection is made by entering a password and confirming with 'ENT'.
• The following default passwords are defined:
- Level 0: no password required
- Level 1: 1234
- Level 2: 2345
These passwords can be changed via the R&S RNMS3000 (Radio Network Manage-
ment System).
• The issuance of user rights (i.e. user levels) is managed by the system administrator.
• The assignment of user levels to radio functions is fix and cannot be changed.
The default is user level 0. To set a user level the password for this user level has to be en-
tered. When the correct password has been entered, the text color changes to green. After
confirming the password with ’ENT’ the new user level is set and shown in the center window.
This setting is used radio wide for all softkeys. Entering an invalid password or an empty val-
ue sets the radio to user level 0.
Once logged in the user can access all functions which require this level or a lower level.
Figure 3.52 shows the currently set system-wide user level.
To Next Page
Loading...
Need help?
General
