Operating Manual 6175.4760.02 – 01 3.165
M3SR Series 4100 Selecting the F1D Baud Rate
3.7.2.28 Selecting the F1D Baud Rate
Softkey Softkey Type Description
Listbox 1. Press 'BAUD' softkey.
2. Select desired baud rate from listbox.
3. Press 'ENT' to confirm.
Possible values (bit/s):
50 - 75 - 100 - 150 - 300 - 600
The baud rate and the F1D shift directly influ-
ence the IF filter bandwidth. The bandwidth is
automatically adapted by the radio.
For ALE operation (option) within link
mode analog voice / FF and selected mod-
ulation mode F1D the baud rate is 600 bit/s.
To Next Page
Loading...