Operating Manual 6175.4760.02 – 01 4.203
M3SR Series 4100 Deleting a User Hopset Subband
Deleting a User Hopset Subband
By means of softkey 'Delete' the operator can delete a user hopset subband.
Softkey Type Description
Example for deleting a hopset band in the
range of 12001 kHz up to 12046 kHz
Select hopset band which should be deleted.
1. Press softkey 'Edit' to open hopset fre-
quency editor.
2. Select hopset to be deleted.
3. Press 'ENT' to confirm
4. To complete the delete operation press
the 'Delete' softkey.
The modification is now complete.
Press 'Delete' to remove hopset from list.
The previously selected hopset is now re-
moved from the list.
To Next Page
Loading...
Need help?
General
