M3SR Series 4100 Selecting a Hopset
4.178 Operating Manual 6175.4760.02 – 01
4.8.3.12 Selecting a Hopset
By means of softkey 'Hopset' the operator can select a hopset.
Softkey Type Description
Listbox
The currently used hopset is displayed in the
central area.
1. Press softkey 'Hopset' .
2. Select desired hopset from listbox.
3. Press 'ENT' to confirm.
The new hopset is now effective.
In the hopset frequency ranges are defined for
frequency hopping.
Hopsets have to be configured using the R&S
RNMS3000. User Hopsets (see
sect. 4.8.4.12 Editing a User Hopset) are con-
figured using the MMI
The user hopsets are freely configurable by
the user of the radio (see also
sect. Defining a New Hopset).
To Next Page
Loading...