Operating Manual 6175.4760.02 – 01 3.219
M3SR Series 4100 Priority Channel
3.9.4.14 Priority Channel
Softkey Softkey Type Description
1. Choose channel from scanning channel
list.
2. Press 'Prio Chan' softkey.
3. Press 'ENT' key to confirm.
Possible values:
All channel numbers that are previously added
to the scanning list.
The softkey 'Prio Chan' is enabled only if
there is at least one channel added to the
channel list.
Activate By pressing this softkey the operator deacti-
vates the channel priority (Prio Chan).
Press 'Delete Prio Chan' softkey.
The actual priority channel is deleted.
Possible values:
All channel numbers that are previously added
to the scanning list.
The softkey 'Delete Prio Chan' is enabled
only if a priority channel is set.
To Next Page
Loading...