R&S M3SR 4100 Series - Figure 3.8 Example of a Listbox; Table 3.5 Toggle Softkeys; Table 3.6 Listbox Softkeys

Operating Manual 6175.4760.02 – 01 3.17
M3SR Series 4100 Operating Concept
Softkeys to Make Settings
Softkeys are control elements used to make settings. The following four possibilities are
available to make settings with softkeys:
Toggle softkey:
Table 3.5 Toggle Softkeys
Listbox softkey:
Table 3.6 Listbox Softkeys
Figure 3.8 Example of a Listbox
1. Active Setting
2. Currently Selected Setting
Use the knob to select one of the settings listed in the listbox.
Softkey label Note
Press this softkey to toggle between two settings. Both settings are listed in the toggle soft-
key. The currently active setting is shown in blue.
Softkey label Note
Press this softkey to open a listbox (see Figure 3.8).
ICN-4D-C-231000-R-D0894-00025-A-01-1
1
2