R&S M3SR 4100 Series - Switching the Acceptance of an ALE-2 G Call on or off

Operating Manual 6175.4760.02 – 01 4.91
M3SR Series 4100 Switching the Acceptance of an ALE-2G Call On or Off
4.4.5.2 Switching the Acceptance of an ALE-2G Call On or Off
Softkey Selection / Editor Description
Toggle 1. Press softkey to toggle the acceptance of
ALE-2G calls on/off.
Possible values:
•ON
•OFF
If 'Accept A2G' is switched on, after reception
of an ALE-2G call, the radio links up. Switch
this function off, if you are using an ALE-3G-
only network.