M3SR Series 4100 Lock Frequency or Channel
3.210 Operating Manual 6175.4760.02 – 01
3.9.4.7 Lock Frequency or Channel
Softkey Softkey Type Description
Activate If an activity on a channel is detected, the
scanning changes to the 'activity detected'
state. If the operator decides that the detected
activity is not relevant, he can press the 'Lock-
out Frequency' softkey. From then on, this fre-
quency is no longer detected.
Activate If an activity on a channel is detected, the
scanning changes to the 'activity detected'
state. If the operator decides that the detected
activity is not relevant, he can press the 'Lock-
out Channel' softkey. The concerned channel
will be deleted from the scanning channel list.
To Next Page
Loading...