M3SR Series 4100 Switching Protected Fine Time Request (Time Lag < 2 s) On or Off
4.54 Operating Manual 6175.4760.02 – 01
4.3.6.18 Switching Protected Fine Time Request (Time Lag < 2 s) On or Off
Softkey Type Description
Toggle
In the central area the currently active value is
displayed.
1. Press softkey to toggle the fine time syn-
chronization on/off.
The new value is selected immediately.
Possible values:
•ON
•OFF
With the protected fine time request, a net sta-
tion inquires the time from the time server or
from another net station. The time lag between
the two stations must not be greater than two
seconds. The received time quality then is
poorer by one level than the actual reference
time. Time transmission is protected.
To Next Page
Loading...
Need help?
General
