Operating Manual 6175.4760.02 – 01 3.149
M3SR Series 4100 Changing the Clarifier Frequency
3.7.2.14 Changing the Clarifier Frequency
Softkey Softkey Type Description
Editor 1. Press 'CLARIF' softkey.
2. Change to desired value.
3. Press 'ENT' to confirm.
Possible values:
-200 Hz up to +200 Hz
Default value:
0Hz
The clarifier function is used for fine tuning to
the received signal (receiver incremental tun-
ing, RIT).
This function is particularly important for single
sideband modulation (SSB), where the clarifi-
er can improve the readability of the voice sig-
nal.
To Next Page
Loading...
Need help?
General
