Operating Manual 6175.4760.02 – 01 5.71
M3SR Series 4100 Changing the Radio Air Interface IP Address
5.3.3.1 Changing the Radio Air Interface IP Address
Softkey Type Description
Editor 1. Press softkey to open the editor for the air
IP address.
2. Use the knob or the numeric keypad to
edit each of the four numbers separately.
3. To select the next number press the ‘point’
key.
4. Press 'ENT' to confirm.
A message box appears: 'Please reboot the
radio to make this change take effect.'
The air IP address specifies the IP address of
the air IP interface. By this address the radio is
addressed within the air IP network on IP layer
level.
Combined with the air IP netmask, the air IP
network is defined.
It is required that all radios forming an air net-
work reside in the same air IP network in order
to allow proper IP routing.
This parameter needs a restart in order to
take effect.
To Next Page
Loading...