R&S M3SR 4100 Series - ALE Group Call Address Selection and Address Editor

Operating Manual 6175.4760.02 – 01 4.27
M3SR Series 4100 ALE Group Call Address Selection and Address Editor
4.3.5.12 ALE Group Call Address Selection and Address Editor
Softkey Example Description
In the following example TOM and SAM have
been selected for a group call.
1. Press 'GRP ADDR' softkey.
2. Configure your station for a group call
by adding or removing stations. See
'Group Address Editor' below.
After pressing the 'ENT' softkey the selection
is displayed in the softkey and the group call is
active.
3. Press 'ENT' to confirm the group and
activate the group call.
The new group call address list is now select-
ed and the top of the list is displayed in the
central area.