R&S M3SR 4100 Series - Changing the VOX Holdtime for SDV Communication; Changing the VOX Sensitivity for SDV Communication; SEC VOICE Configuration Menus

M3SR Series 4100 SEC VOICE Configuration Menus
4.154 Operating Manual 6175.4760.02 – 01
4.7.5 SEC VOICE Configuration Menus
Figure 4.35 Menu 1621: Sec. Voice Cfg 1/1
4.7.5.1 Changing the VOX Sensitivity for SDV Communication
By means of softkey 'VOX SENS' the operator can change the VOX (Voice-Operated Trans-
mission) sensitivity.
This procedure is described insect. 3.7.3.11 Changing the VOX Sensitivity.
4.7.5.2 Changing the VOX Holdtime for SDV Communication
By means of softkey 'VOX HANG' the operator can change the VOX holdtime.
This procedure is described insect. 3.7.3.10 Changing the VOX Holdtime.
ICN-4D-J-231003-R-D0894-00006-A-01-1