Operating Manual 6175.4760.02 – 01 4.169
M3SR Series 4100 Initiating a Free Hopset Search
4.8.3.4 Initiating a Free Hopset Search
By means of softkey 'FHS Start' the operator can initiate a Free Hopset Search if it is enabled
(see sect. 4.8.4.3 Switching the Free Hopset Search Mode On or Off) and a single station is
addressed.
Softkey Type Description
Activate
1. Press softkey 'FHS Start'.
The call state displayed in the central area of
the display shows "FHS RUNNING".
Once running, a FHS can not be aborted.
If FHS has finished, the call state changes to
"FHS SUCCESS" and the AHS (see
sect. 4.8.3.5 Switching the Advanced Hopset
On or Off) is enabled
or
the call state changes to "FHS FAILED".
To Next Page
Loading...