M3SR Series 4100 Changing the Link Timeout for Analog Voice/FF Links
4.92 Operating Manual 6175.4760.02 – 01
4.4.5.3 Changing the Link Timeout for Analog Voice/FF Links
Softkey Type Description
Editor
In the central area the currently active value is
displayed.
1. Press softkey 'Link Timeout'.
2. Change value with the knob.
3. Press 'ENT' to confirm.
Possible values:
0 s to 5000 s
0 means infinite link timeout!
stepwidth of 1 s
If there is no transmit activity during active an-
alog voice/FF links, a terminate command will
be sent automatically after this timeout is
reached.
For ALE-2G links this link timeout is valid for
all links (analog voice/FF links as well as inter-
nal modem links) .
To Next Page
Loading...
Need help?
General
