Operating Manual 6175.4760.02 – 01 5.115
M3SR Series 4100 Entering the Phone Number for a Manual Dial
5.5.2.1 Entering the Phone Number for a Manual Dial
Softkey Type Description
Editor Press the softkey 'Call Number' to give the
number of the desired called party. This can
be a phone number or a SIP URI and may con-
sist of up to 46 characters (2 lines of the
screen).
Press ‘ENT’ afterwards.
The radio tries to call the desired party and the
current call state is displayed in the central
area of the screen.
To Next Page
Loading...