Operating Manual 6175.4760.02 – 01 4.51
M3SR Series 4100 Switching Passive Time Acquisition On or Off
4.3.6.15 Switching Passive Time Acquisition On or Off
Softkey Type Description
Toggle
In the central area the currently active value is
displayed.
1. Press softkey to toggle the passive time
acquisition on/off.
The new value is selected immediately.
Possible values:
•ON
•OFF
With the passive time acquisition protected
transmissions are monitored. If at least two
stations receive a time with a better time qual-
ity than their own, the clock of the receiver will
be adjusted.
To Next Page
Loading...