M3SR Series 4100 Addressing Different Link Types
4.166 Operating Manual 6175.4760.02 – 01
4.8.3.2 Addressing Different Link Types
The address system of SECOM-H supports two types of links:
• Station: Link to one particular station (Rohde & Schwarz device) of the network
• Group: Link to a group of radios (Rohde & Schwarz device) of the network
These different addressing possibilities are described below. Please note that for use within
a network all participating units, radios, groups and nets need to be configured by using the
R&S RNMS3000 (radio network management system) software.
Addressing a Station
By means of softkey 'Station Address' the operator can address a single radio.
Addressing a Group
By means of softkey 'Group Address' the operator can address a group of radios.
Softkey Type Description
Listbox
The currently selected station is displayed in
the central area.
1. Press softkey 'Station Address' .
2. Select desired station address to call on
from listbox.
3. Press 'ENT' to confirm.
The station name is selected for addressing.
Softkey Type Description
Listbox
The currently selected group is displayed in
the central area.
1. Press softkey 'Group Address' to open list-
box.
2. Select desired group address to call on.
3. Press 'ENT' to confirm.
The listbox is closed. The group name is se-
lected for addressing.
To Next Page
Loading...