R&S M3SR 4100 Series - Changing the SECOM-H Date and Time

M3SR Series 4100 Changing the SECOM-H Date and Time
4.192 Operating Manual 6175.4760.02 – 01
4.8.4.10 Changing the SECOM-H Date and Time
By means of softkey 'Date Time' the operator can change the R&S SECOM-H net date and
time.
Softkey Selection / Editor Description
Example for entering date 2006.04.15 and
time 12:30:00
Press 'Date Time' softkey.
1. Press softkey 'Date Time' to open listbox.
2. Enter valid date and/or time.
3. Press 'ENT' to confirm.
The new selection is now effective.
Enter valid date either with numeric keypad or/
and with knob.
When time and date are correct, press 'ENT' to
confirm.
The currently set date and time are also dis-
played in the central area:
You can skip a value for entering by press-
ing .