R&S M3SR 4100 Series - Selecting the Waveform

M3SR Series 4100 Selecting the Waveform
4.186 Operating Manual 6175.4760.02 – 01
4.8.4.5 Selecting the Waveform
By means of softkey 'WF' (waveform) the operator can change the waveform.
Softkey Type Description
Listbox 1. Press softkey 'waveform' .
2. Select desired waveform from listbox.
3. Press 'ENT 'to confirm.
The new selection is now effective.
Possible values:
WF1, WF2, WF3, WF5