Operating Manual 6175.4760.02 – 01 4.193
M3SR Series 4100 Selecting the Time Source
4.8.4.11 Selecting the Time Source
By means of softkey 'Time Source' the operator can select the time source.
Softkey Type Description
Listbox
The currently used time source is displayed in
the central area.
1. Press softkey 'Time Source'.
2. Select desired Time Source from listbox.
3. Press 'ENT' to confirm.
The new selection is now effective.
Possible values:
• RTC (real-time clock)
• GPS (global positioning system)
To Next Page
Loading...
Need help?
General
