R&S M3SR 4100 Series - Selecting a Keyset

Operating Manual 6175.4760.02 – 01 4.179
M3SR Series 4100 Selecting a Keyset
4.8.3.13 Selecting a Keyset
By means of softkey 'Keyset' the operator can select a keyset.
Softkey Selection / Editor Description
Listbox
The currently used keyset is displayed in the
central area.
1. Press softkey 'Keyset'.
2. Select desired keyset from listbox.
3. Press 'ENT' to confirm.
The new keyset is now effective.