Operating Manual 6175.4760.02 – 01 3.45
M3SR Series 4100 Control and Monitoring of Radio and Control Unit
Figure 3.27 Preset Page Selection (Example)
After delivery from factory the radio holds only one Preset Page. This initial Preset
Page 0 is pre-configured with communication mode Fixed Frequency (FF). But the ra-
dio can hold up to 100 Preset Pages (presets). A preset contains a complete set of pa-
rameter settings of a communication mode. All presets are easily prepared with a PC,
using the Radio Network Management System (R&S RNMS3000, for details see R&S
RNMS3000 documentation), and are loaded into the radio via fillgun, from a PC via se-
rial cable or via LAN (see sect. 3 Operation). Preset Page 0 can be edited by the oper-
ator as well. On Preset Page 0 only fixed frequencies (FF) can be set. Any
communication mode may be assigned to the Preset Pages 1 to 99 (see
sect. 4 Operation in Special Communication Modes ). All of these Preset Pages (1 to
99) have to be prepared with a PC, using R&S RNMS3000.
ICN-4D-G-231000-R-D0894-00043-A-01-1
To Next Page
Loading...