R&S M3SR 4100 Series - Selecting the HDL Number of Packets Per Tx Frame

M3SR Series 4100 Selecting the HDL Number of Packets per Tx Frame
4.98 Operating Manual 6175.4760.02 – 01
4.4.5.8 Selecting the HDL Number of Packets per Tx Frame
Softkey Selection / Editor Description
Listbox 1. Press 'HDL Pack' softkey.
2. Select desired number of packets from
listbox.
3. Press 'ENT' to confirm.
The new HDL number of packets per Tx frame
is now effective.
Possible values:
•3
•6
•12
•24