M3SR Series 4100 Editing a User Hopset
4.194 Operating Manual 6175.4760.02 – 01
4.8.4.12 Editing a User Hopset
SECOM-H Configuration menu 2/2 provides a folder User Hopset to configure user-defined
hopsets (see Figure 4.42):
Figure 4.42 Hopset Folder Main Menu in CFG 2/2 Menu
A user hopset, which may consist of several subbands and single frequencies, can be edited
in several ways. Frequencies can be inserted, edited or deleted, or a completely new hopset
may be defined. The following applies to all procedures:
ICN-4D-F-231021-R-D0894-00010-A-01-1
To Next Page
Loading...