R&S M3SR 4100 Series - Changing the A1 A Holdtime

M3SR Series 4100 Changing the A1A Holdtime
3.174 Operating Manual 6175.4760.02 – 01
3.7.3.4 Changing the A1A Holdtime
Softkey Softkey Type Description
Listbox 1. Press 'A1A-Hold' softkey.
2. Choose desired time value from listbox.
3. Press ENT to confirm.
Possible values (in ms):
50 - 100 - 150 - 200 - 250 - 300 - 350 - 400 -
450 - 500
The A1A holdtime is the delay from the mo-
ment the operator releases the PTT key (Tx
operation) until the radio returns to state Rx.