M3SR Series 4100 ALE Group Call Address Selection and Address Editor
4.28 Operating Manual 6175.4760.02 – 01
Group address editor
Softkey Type Description
Example for adding TOM and SAM to list Adding stations:
1. Select station name which shall participate
in the group call by using the knob.
2. Press 'ADD'. The station now participates
in the group call, its address is highlighted
in blue.
1. Station TOM is selected for adding.
2. Adding of TOM to list by pressing ADD
3. Station SAM is selected for adding
4. Adding of SAM to list by pressing ADD
Now TOM and SAM are selected for the group
call.
Removing stations:
1. Select station name which shall no longer
participate in the group call by using the
knob
2. Press 'DELETE'.
The station is now deleted from the group call
list.
To Next Page
Loading...