Operating Manual 6175.4760.02 – 01 2.41
M3SR Series 4100 Basic Configuration of the Control Unit
4. Press softkeys to change the IP settings (IP Address, Subnet Mask and Gateway) of
the control unit. For details see also sect. 3.5.2 Control Unit MTC 2/4 (4002).
5. Press softkey and the display appears as shown in Figure 2.21.
6. Press softkeys to Insert, Delete or Edit an entry in the list.
Press softkey to select the radio as local (for details see Figure 2.21).
7. Switch the control unit and radio, respectively, off to make the changes take effect.
To Next Page
Loading...