M3SR Series 4100 Radio Maintenance
3.54 Operating Manual 6175.4760.02 – 01
Start the Initiated Built-in Test (IBIT).
It takes a few seconds to perform the IBIT. While IBIT
is running, a message window comes up indicating
that the IBIT is in progress. When the IBIT it is over, an-
other message window comes up indicating that the
IBIT is finished. During IBIT it is not possible to navi-
gate to other menus or to make any other settings.
This function is available on Preset Page 0 only. For
further details about built-in test see
sect. 6.2 Troubleshooting.
Navigate to the menu Radio MTC 2/7 (see
sect. 3.4.5 Menu Radio MTC 2/7 (3002)).
Softkey Description Possible Values
To Next Page
Loading...