R&S M3SR 4100 Series - Page 197

Operating Manual 6175.4760.02 – 01 3.81
M3SR Series 4100 Menu VoIP 2/2 (3062)
Softkey Description Possible Values
Navigate to the previous menu (VoIP 1/2, see
sect. 3.4.6 Menu VoIP 1/2 (3061)).
Open an editor to change
the Tx URI whic h is required
to set the radio into ED137
mode.
Default: TX Up to 64 characters
• a to z
• A to Z
• _
Open an editor to change
the Rx URI which is re-
quired to set the radio into
ED137 mode.
Default: RX Up to 64 characters
• a to z
• A to Z
•_
Open an editor to change
the lo w e st port w hich can b e
used by the radio for the
RTP datastream.
Select the size with the
knob or with the numeric
keypad.
Default: 4000 0 to 65535
Open an editor to change
the highest port which can
be used by the radio for the
RTP datastream.
Select the size with the
knob or with the numeric
keypad.
Default: 65535 0 to 65535
Open a listbox and use the
knob to select the mode of
the VoIP service.
Press 'ENT' to confirm.
Default: ED137+SIP OFF
Disable VoIP service.
ED137+SIP
Accepts both, ED137 and SIP
calls.
ED137B only
Rejects SIP calls which are
not ED137B.
Open an editor to change
the jitter buffer size.
Select the size with the
knob or with the numeric
keypad.
Default: 60 ms 0 to 200 ms in steps of 20 ms