Operating Manual 6175.4760.02 – 01 3.137
M3SR Series 4100 Recalling Settings
Channel 101 is the default channel. When the operator presses the erase key, all chan-
nels, except channel 101, will be erased. Channel 101 will be reset to its default values
to give the operator a starting point to manually configure other channels.
Possible values:
Channels 1 to 400 are configurable.
Channels 401 to 25030 are reserved for pre-
defined maritime channels (read-only chan-
nels)
Maritime channels used with modulation
J3E+:
401 to 429, 601 to 608, 801 to 837, 1201 to
1241, 1601 to 1656, 1801 to 1815, 2201 to
2253, 2501 to 2510
Maritime channels used with modulation F1D:
4001 to 4019, 6001 to 6034, 8001 to 8040,
12001 to 12156, 16001 to 16193, 18001 to
18045, 22001 to 22135, 25001 to 25040
Softkey Softkey Type Description
To Next Page
Loading...