M3SR Series 4100 Download from Fillgun into Radio
3.194 Operating Manual 6175.4760.02 – 01
- Select the desired RGA (that is the radio configuration coming with this RGA) to be
loaded to the radio with the knob and press ENT.
- Press softkey
to start the download.
If you load an already loaded configuration, in the Fill Gun menu central area the
state changes to: DATA ALREADY USED!. Press again softkey 'Load' to continue
or press softkey 'Break' and select another configuration.
- The download progress is displayed in the central area of the Fill Gun menu (see
Figure 3.80).
- After the download has finished (100 %) a message box comes up indicating suc-
cessful completion.
Confirm the message with 'ENT' or wait until the message box disappears automat-
ically after a few seconds.
4. Switch the radio off.
5. Disconnect R&S GP3000 from the radio.
To Next Page
Loading...