Operating Manual 6175.4760.02 – 01 4.141
M3SR Series 4100 Selecting the HF Modem Waveform
It is not possible to use the autobaud capa-
bility in combination with the synchronous
interface.
The waveforms according to STANAG 4529
and STANAG 4481 FSK allow to adjust the
subcarrier frequency for reception and trans-
mission within certain limits. Since the memory
for these settings is shared between several
waveforms, make sure to set the desired val-
ues in the operational menu before starting
communication with the STANAG 4529 or
STANAG 4481 FSK waveforms. All other
waveforms set the required frequencies auto-
matically.
Softkey Type Description
To Next Page
Loading...