Operating Manual 6175.4760.02 – 01 4.207
M3SR Series 4100 Editing a User Keyset
Press 'ENT' after COMSEC key has been
completely entered.
Letters like A to F can be entered only by
knob.
Enter new TRANSEC key.
When editing the currently active user key-
set, the changes will take effect immediate-
ly. Otherwise the new settings will take
effect only when the relevant user keyset is
selected.
Letters like A to F can be entered only by
knob.
Press 'ENT' to confirm TRANSEC key. The
keyset is now defined.
Softkey Selection / Editor Description
To Next Page
Loading...