Operating Manual 6175.4760.02 – 01 9.7
M3SR Series 4100 Drawings
1 Control Cable / Fiber Optic (receiver / exciter X21 – power amplifier X31), R&S GK4101,
6120.5607.xx (xx: 10 = 1.0 m, 35 = 3.5 m, 50 = 50 m)
2 DC Cable (receiver / exciter X31 – power amplifier X24), R&S GK4104, 6120.5907.xx
(05 = 0.5 m, 10 = 1.0 m, 25 = 2.5 m)
3 RF Cable (receiver / exciter X2112 – power amplifier X20)
R&S GK4105 6120.3604.03 (03 = 3 m)
4 Control Cable (power amplifier X23 – power supply X33)
R&S GK4106 6120.3656.03 (03 = 30 m)
5 DC Cable (power amplifier X21 – power supply X34)
R&S GK4107 6120.3704.03 (03 = 3 m)
6 Ground Connection (M6)
7 Control Cable / Fiber Optic (HF post selection X23 - power amplifier X32), RS GK4101,
6120.5620.xx (10 = 1 m, 35 = 3.5 m, 50 = 50 m)
8 RF Cable (HF post selection X28 - power amplifier X25), R&S GK3013,
6123.3005.xx (02 = 6 m, 03 = 3 m, 05 = 5 m, 12 = 12 m, 20 = 20 m, 25 = 25 m, 50 = 50 m)
9 Mains Connection
10 Battery Connection
11 DC supply adapter (power amplifier X24)
12 DC Cable (HF post selection X121 - DC supply adapter),
R&S GK4104, 6120.5907.xx (05 = 0.5 m, 10 = 1.0 m, 25 = 2.5 m)
13 Antenna Connection
To Next Page
Loading...
Need help?
General
