Toshiba e-STUDIO 6550Ce-STUDIO 5560C - Page 1123

9
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
REPLACEMENT OF PC BOARDS/HDD
9 - 17
(3) Release 2 latches and take off the SRAM
board for SYS board from the case.
Fig. 9-49
Notes:
• The shape of the SRAM board for the
SYS board differs from the one for the
LGC board.
Be sure to assemble the correct SRAM
board.
• Be sure to assemble the correct SRAM
board.
Fig. 9-50
Fig. 9-51
Latch
SRAM board
<for SYS board>
Case
SRAM board
<for SYS board>
SRAM board
<for LGC board>
[
1
]
[
2
]