Toshiba e-STUDIO 6550Ce-STUDIO 5560C - Bridge Unit Transport Exit Motor

4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 217
4.10.15 Bridge unit transport exit motor (M5)
(7) Take off the bridge unit transport entrance
motor by removing 2 screws.
(8) Disconnect the connector from the bridge
unit transport entrance motor.
Fig. 4-629
(9) Take off the reverse motor by removing 2
screws.
Fig. 4-630
(1) Take off the bridge unit.
 P. 4-213"4.10.11 Bridge unit"
(2) Release the harness from 2 clamps and then
disconnect 2 connectors.
 P. 4-216"4.10.14 Bridge unit transport
entrance motor (M4) / Reverse motor (M3)"
(3) Disconnect 1 connector.
Fig. 4-631
Bridge unit transport
entrance motor
Reverse motor