8
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
ERROR CODE and TROUBLESHOOTING
8 - 339
8.5.28 White void in the halftone
Fig.8-37
Cause/Section Step Check item Measures
Paper 1 Does the paper mode correspond
to the paper type?
Check the paper type.
Use the recommended paper.
2 Is the paper damaged such as
curled?
Replace the paper.
Fuser unit 3 Installed position of the fuser unit Install it correctly.
4 Is there any stain on the metal
plate of the paper guide?
Clean the paper guide.
5 Is there any deformation or scratch
on the metal plate of the paper
guide?
Replace the paper guide.
6 Is there any stain on the rib plastic
part in the paper guide?
Clean the paper guide.
2nd transfer unit
area
7 Are the plastic part and the sensor
bracket in the 2nd transfer rear
guide installed properly?
Install them correctly.
Feeding direction
To Next Page
Loading...
