Toshiba e-STUDIO 6550Ce-STUDIO 5560C - Gamma Balance Adjustment

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
SETTING ADJUSTMENT
6 - 36
6.2.4 Gamma balance adjustment
The density adjustment at the Black Mode is performed by selecting its density area from the following:
low density, medium density and high density.
<Adjustment Mode (05)>
Make a test copy and compare the image obtained with the current settings; if necessary, make
adjustments according to the following procedure.
Notes:
Be sure that this adjustment is made after performing  P. 6-31"6.2.1 Automatic gamma
adjustment".
<Procedure>
The procedure is the same as that of  P. 6-34"6.2.3 Color balance adjustment".
Color
mode
Original mode
Item to
be
adjusted
Remarks
Text/
Photo
Text Photo
Gray
scale
ACS/
Black/
Text/
Photo
ACS/
Black/
Text
ACS/
Black/
Photo
Custom
mode
Black 7190-0 7191-0 7192-0 7956-0 7957-0 7958-0 7959-0 7276-0 Low
density
The larger
the value
is, the
density of
the item
to be
adjusted
becomes
darker.
Acceptabl
e values:
0 to 255
(Default:
128)
7190-1 7191-1 7192-1 7956-1 7957-1 7958-1 7959-1 7276-1 Medium
density
7190-2 7191-2 7192-2 7956-2 7957-2 7958-2 7959-2 7276-2 High
density