Toshiba e-STUDIO 6550C e-STUDIO 5560C User Manual

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
SETTING ADJUSTMENT
6 - 52
6.3.2 Gamma balance adjustment (Black Mode)
The gamma balance is adjusted by adjusting the density at the Black Mode. The adjustment is
performed by selecting its density area from the following: low density, medium density, high density
and max density.
When “Black” (600 dpi) is set for the color mode and “Auto” is selected for the halftone setting, the
gamma balance can be adjusted in each area of Text, Graphics and Image.
<Adjustment Mode (05)>
Color
mode
Smooth Detail Smooth Detail Smooth Detail
Item to
be
adjuste
d
Item to
be
adjuste
d
Remarks
(PS) (PS) (PCL) (PCL) (XPS)
(XPS)
When
“0” is
set for
“05-
8066”
When
“1” is
set for
“05-
8066”
Black
(600dpi)
7315-0 7316-0 7317-0 7318-0 7319-0
7320-0
Low
density
Low
density
The
larger the
value is,
the
density of
the item
to be
adjusted
becomes
darker.
Acceptab
le values:
0 to 255
(Default:
128)
7315-1 7316-1 7317-1 7318-1 7319-1
7320-1
Medium
density
Medium
density
7315-2 7316-2 7317-2 7318-2 7319-2
7320-2
High
density
High
density /
Maximu
m
density
Black
(1200dp
i)
7309-0 7310-0 --- --- --- --- Low
density
Low
density
7309-1 7310-1 --- --- --- --- Medium
density
Medium
density
7309-2 7310-2 --- --- --- --- High
density
High
density /
Maximu
m
density

Toshiba e-STUDIO 6550C e-STUDIO 5560C Specifications

General

Brand	Toshiba
Model	e-STUDIO 6550C e-STUDIO 5560C
Category	All in One Printer
Language	English