Toshiba e-STUDIO 6550Ce-STUDIO 5560C - Examples

11
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
FIRMWARE UPDATING
11 - 21
[E] Examples
Examples of update are as below. In this section, the procedure is explained by focusing on a
differential items update.
No. Operation Update procedure When update has failed
1
Updating from
L2.0 to L2.1
Perform a differential items
update from L2.0 to L2.1.
Perform a standard update to L2.0
which is the base version of L2.1 before
carrying out a differential items update
to it.
2
Updating from
L2.0 to L2.2
Perform a differential items
update from L2.0 to L2.2.
(Updating to L2.1 is
unnecessary.)
Perform a standard update to L2.0
which is the base version of L2.2 before
carrying out a differential items update
to it.
3
Updating from
L2.1 to L2.12
Perform a patch update from
L2.1 to L2.12.
Perform a patch update from L2.1 to
L2.12.
4
Updating from
L2.2 to L3.0
Perform a standard update
from L2.2 to L3.0.
Perform a standard update to L3.0.
5
Updating from
L2.1 to L3.1
Perform a standard update
from L2.1 to L3.0 which is the
base version of L3.1 before
carrying out a differential
items update to it.
Perform a standard update to L2.0
which is the base version of L2.1.
Perform a standard update to L3.0 and
then carry out a differential items
update to L3.1.
No.1
No.2
No.3
No.4
No.5
Differential
items L1.1
Differential
items L2.1
Patch L2.12
Differential
items L2.2
Base version
L3.0
Differential
items L3.1
Base version
L2.0