4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 119
4.6.32 K drum phase sensor (S44)
(1) Take off the rear cover.
P. 4-7"4.1.18 Rear cover"
(2) Release 4 re-use band [1] and take off the
harness guide [2].
Fig. 4-349
(3) Disconnect 1 connector and remove 2
screws. Then take off the bracket.
Fig. 4-350
(4) Release 3 latches. Then take off the K drum
phase sensor.
Fig. 4-351