4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 307
4.12.3 MJ-6102 (Hole punch unit)
(1) Turn OFF the power and unplug the power
cable.
(2) Take off the connector cover and disconnect
the interface cable of the finisher.
Fig. 4-11
(3) Open the cover of the hole punch unit.
(4) Pull the lever to release the lock.
Fig. 4-12
To Next Page
Loading...
