Toshiba e-STUDIO 6550C e-STUDIO 5560C User Manual

6
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
SETTING ADJUSTMENT
6 - 37
6.2.5 Background adjustment
The density of the background can be adjusted as follows.
<Adjustment Mode (05)>
For the full color or auto color mode, when you want to adjust the background in a more detailed
manner than the adjustment with the codes given in the above table, use the codes in the following
table. Since the color after the adjustment may differ from the original, check the color while making it.
Make a test copy and compare the image obtained with the current settings; if necessary, make
adjustment using the following procedure.
<Procedure>
The procedure is the same as that of  P. 6-33"6.2.2 Density adjustment".
Color
mode
Original mode
Item to be
adjusted
Remarks
Text/
Photo
Text
Printed
Image
Photo Map
Custom
mode
Gray
scale
Full
color
7656 7657 7658 7659 7660 7661 --- Automati
c density
mode/
Manual
density
mode
The smaller the
value is, the
lighter the
background
becomes.
Acceptable
values:
0 to 255
(Default: 128)
Mono
Color
7754 7755 7756 7757 7758 --- --- Automati
c density
mode
Twin
color
mode
7759 7760 7761 --- --- --- --- Manual
density
mode
ACS
black
7676 7677 --- --- --- --- --- Automati
c density
mode
7678 7679 --- --- --- --- --- Manual
density
mode
Black 7033 7034 --- 7043 --- 7279 7044 Automati
c density
mode
7041 7042 --- 7048 --- 7280 7049 Manual
density
mode
Color
mode
Original mode
Item to be
adjusted
Remarks
Text/
Photo
Text
Printed
Image
Photo Map
Custom
mode
Gray
scale
Full
color /
Auto
color
(color)
7744 7745 7746 7747 7748 7762 --- Automati
c density
mode
The smaller the
value is, the
lighter the
background
becomes.
Acceptable
values:
0 to 255
(Default: 128)
7749 7750 7751 7752 7753 7763 --- Manual
density
mode

Toshiba e-STUDIO 6550C e-STUDIO 5560C Specifications

General

Brand	Toshiba
Model	e-STUDIO 6550C e-STUDIO 5560C
Category	All in One Printer
Language	English