Toshiba e-STUDIO 6550Ce-STUDIO 5560C - Carriage Home Position Sensor (S6); Platen Sensor (S7); SLG Board (SLG)

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 34
4.3.16 Carriage home position sensor (S6)
4.3.17 Platen sensor (S7)
4.3.18 SLG board (SLG)
(1) Take off the top rear cover.
 P. 4-7"4.1.20 Top rear cover"
(2) Remove the seal.
(3) Disconnect 1 connector. Release the latches
and take off the carriage home position
sensor.
Fig. 4-93
(1) Remove the RADF.
(2) Take off the top rear cover.
 P. 4-7"4.1.20 Top rear cover"
(3) Disconnect 1 connector. Release the latches
and take off the platen sensor.
Fig. 4-94
(1) Open the RADF.
(2) Take off the lens cover.
 P. 4-16"4.3.2 Lens cover"
(3) Disconnect 10 connectors, remove 4 screws
and take off the SLG board.
Fig. 4-95
Carriage
home position sensor
Platen sensor
SLG board