Toshiba e-STUDIO 6550Ce-STUDIO 5560C - ADU Transport Roller-2

4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 247
4.10.45 ADU transport roller-2
(11) Remove 2 E-rings and then take off the
bearing. Then take off the ADU transport
roller-1.
Fig. 4-718
(1) Take off the duplexing unit rear cover.
 P. 4-5"4.1.14 Duplexing unit rear cover"
(2) Take off the duplexing unit front side cover.
 P. 4-242"4.10.38 Duplexing unit front side
cover"
(3) Take off the ADU motor-2.
 P. 4-244"4.10.42 ADU motor-2 (M8)"
(4) Open the duplexing unit cover.
(5) Remove 2 screws and take off the front hook
cover.
Fig. 4-719
(6) Remove 1 spring.
Notes:
Be careful because the spring force is quite
strong.
Fig. 4-720
ADU transport roller-1
Bearing
Bearing
Front hook cover