3
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
OUTLINE OF THE MACHINE
3 - 71
3.11.2 Composition
Feeding system
1st / 2nd / 3rd / 4th drawer feeding
unit
1st / 2nd / 3rd / 4th drawer pickup roller PM parts
1st / 2nd / 3rd / 4th drawer feed roller PM parts
1st / 2nd / 3rd / 4th drawer separation roller PM parts
1st / 2nd / 3rd / 4th drawer transfer roller PM parts
1st / 2nd / 3rd / 4th drawer feed sensor S78/S86/S94/S102
1st / 2nd / 3rd / 4th drawer transport sensor S77/S85/S93/S101
1st / 2nd / 3rd / 4th drawer tray-up sensor S76/S84/S92/S100
1st / 2nd / 3rd / 4th drawer empty sensor S75/S83/S91/S99
1st / 2nd / 3rd / 4th drawer detection sensor S73/S81/S89/S97
Bypass feeding unit Bypass pickup roller PM parts
Bypass feed roller PM parts
Bypass separation roller PM parts
Bypass paper roller S71
Bypass feed sensor S72
Bypass transport sensor SOL8
Bypass pickup solenoid S70
Bypass motor M12
Drive section, other 3rd / 4th drawer transport clutch CLT4/CLT6
3rd / 4th drawer feed clutch CLT5/CLT7
Transport motor-1/Transport motor-2 M40/M41
Feed motor M42
Feed/transport motor M43
Registration motor M39
Registration roller
Registration sensor S52
Transfer belt paper clinging detection sensor S47
Tray-up motor-1/Tray-up motor-2 M44/M45
Tandem LCF Tandem LCF pickup roller PM parts
Tandem LCF feed roller PM parts
Tandem LCF separation roller PM parts
Tandem LCF transport roller
Tandem LCF feed sensor S93
Tandem LCF transport sensor S94
Tandem LCF pickup solenoid SOL9
Tandem LCF end fence motor M47
Tandem LCF tray-up motor M46
To Next Page
Loading...
Need help?
General
